Towers  
 
For Tower Hire Rates

 All Alto towers come complete with adjustable wheels, kickboards and stabilisers. Sufficient components are issued with each tower to enable the Through the Trap assembly method to be used.

From 2.2 to 10.2 metres high 

Base sizes  

• 0.8m x 1.6m
• 0.8m x 2.4m
•  1.36m x 1.6m 
•  1.36m x 2.4m

WORKING AT HEIGHT
Figures from the Health and Safety Executive reveal that falls from height continue to be the biggest killer in the construction industry.

Edge Protection
The first line of defence is to provide adequate edge protection
It needs to meet minimum legal standards of, or be equivalent to:
A main guard rail at least 910mm above the edge.
A toe board at least 150mm high.
An intermediate guard rail or other barrier so that there is no gap more than 470mm.

Safe use of Scaffold 
Do not take up boards, move handrails or remove ties to gain access for work.
Never work from platforms that are not fully boarded.
Do not overload. Store materials so the load is spread evenly.
Make sure there is suitable access onto the working platform.

The majority of our staff are fully PASMA trained. We can offer advice and assistance on working at height including the 3T method of erecting aluminium towers as recommended by PASMA. A comprehensive assembly guide is issued with each hire.

(PASMA stands for Prefabricated Access Suppliers and Manufacturers Association)

For more information and availability  call-:

Stowmarket 01449 612632      or     Ipswich 01473 710035


 Chimney Scaffold Full & Half Set

Safety Rails available as required

Steel Trestles   
 2 foot & 4 foot

Acro Props & Strongboys   
All sizes

Scaffold Boards 
Maximum 13’ can be cut to size

For details and Hire Rates